Code Composer Studio Version 5 Download

I hate registering to pages to get information or downloads. I really hate it. This is one of the two reasons Arduino has been so popular - it's open source and you can do whatever you want with it.

So I have a Texas Instrument FRAM development board MSP-EXP430FR5739 that I can buy here, in Estonia with no questions asked. I want to program it - I have two choices: commercial Windows only IAR or cross platform Eclipse plugin Code Composer Studio. Off course I try to download Code Composer Studio. But no, I can't. I have to fill out some stupid U.S. Government export approval. WTF. I can get the board and all your high tech chips with no problems but downloading plugin to my Eclipse requires a export document. You have to be crazy. So, if anyone wants it. I host a mirror now:

 

LINUX DOWNLOAD

WINDOWS DOWNLOAD (1.3GB)

Edit: Windows installer is now offline one so it would work.

Posted on 2012-07-07, 14:30 By
22 comments Categories: Soft

22 thoughts on “Code Composer Studio Version 5 Download

  1. I totally agree with you. Thanks for the link!
    These constraints aren't even going to stop anyone that would misuse the system. They could just lie, piece of cake.
    I also found your interesting site because of this mirror link. I will be checking out your projects too!

  2. Thanks. I'm hate US Export bureaucracy too. I love true open source - fully free.
    I've bought lanchpad EK-LM4F120XL for 5$ and set up free toolchan, TI libs (form git://github.com/brmlab/SW-EK-LM4F120XL.git) ocd-git (with patch http://openocd.zylin.com/#/c/922/)
    arm-none-eabi-* freely available from https://launchpad.net/gcc-arm-embedded
    I use the tutorial from http://scompoprojects.wordpress.com/2012/11/07/debugging-a-program-on-the-stellaris-launchpad-board/

  3. Thanks for posting this. When I tried to go through the official channel for this, I got a bloody 404 error upon submitting the form, effectively locking me (and anybody else) out. If they wanted to do this export control bull****, they should have done it with the hardware itself, and included the software with the hardware.

    1. Yes, it is 32bit version. And I have the impression that most 32bit programs work under 64bit systems, but you never know.

  4. I am agreed too....
    Not even these stupid registration forms...their web installers version of softwares sucks too...

    I had number of times frequent Internet Disconnections and finally just bcoz u...I am able to download the full package in one shot..
    thanks mate

  5. Thanks you man. I followed all Ti's registration process finally I got the download email, I clicked but nothing occur. Tried many times.. and nothing... I got mad... I bought many 10$ dollars for my student and I couldn`t get the compiler and any support. Bad.. to bad... But thanks for you time and effort. Haven't installed it yet.. but I hope it will fine.

  6. Great link. Thanks a lot. By the way, can you post mirror for CCS V5.4 or latest? I am need of it for developing codes for MSP430F5529

  7. Do you happen to have the md5 for the windows version? I'm getting an error and need to know if i need to redownload

  8. Hi and thanks. I cannot access to the TI website. They deprive me and my country people to access to their site. Can you please give me a mirror for CCs v6.

    Thanks and regards.

  9. hi bro... thanks for the link... i m a beginner.. i was searching for the ccs.... once again thanks bro...

Leave a Reply to Carver Cancel reply

Your email address will not be published. Required fields are marked *