tinyDino bottom view
I finally built tinyDino. I used AtMega168, so it is 100% compatible with Arduino IDE, just choose "Arduino Pro or Pro Mini (3.3V 8MHz) w/ Atmega168" as your board and it will work.
I built some and will sell them. Also, there is some more pictures:
http://shop.tech-thing.org/tinydino/
tinyDino top view on a 1 € cent
tinyDino with UART cables soldered
Bottom view and pad layout
juuni 20th, 2012 at 21:01
[...] Jaanus Kalde has made the Tinydino, an Arduino clone that’s just 7.4 mm square. He used the ATmega88 chip and built the rest of the components around it. According to Jaanus, its features are: [...]
juuni 20th, 2012 at 22:27
[...] Jaanus Kalde has made the Tinydino, an Arduino clone that’s just 7.4 mm square. He used the ATmega88 chip and built the rest of the components around it. According to Jaanus, its features are: [...]
juuni 21st, 2012 at 10:20
pane täiega,
jõudu ka!
aare
juuni 26th, 2012 at 02:36
[...] Jaanus Kalde has made the Tinydino, an Arduino clone that’s just 7.4 mm square. He used the ATmega88 chip and built the rest of the components around it. According to Jaanus, its features are: [...]
juuni 28th, 2012 at 15:55
[...] arduino that is only 7.4mm by 7.4mm. It’s called the tinyDino. Information can be found here and here. Share this:TwitterFacebookDiggPrintRedditLike this:LikeBe the first to like [...]
juuli 9th, 2012 at 05:10
[...] 야누스 칼데(Jaanus Kalde)가 크기가 7.4 제곱에 불과한 아두이노인 타이니디노(Tinydino)를 만들었습니다. 그는 ATmega88 칩을 사용했으며, 나머지 부품을 마이크로 칩 주변에 배치했습니다. 야누스가 밝힌 바로는 타이니디노는 다음과 같은 기능을 지원합니다. - 자동 리셋 - UART - SPI - 아날로그 채널 4개 - 디지털 입출력 1개 - LED 1개 - 부품목록이 동봉된 재밌는 설명서 [...]
juuli 24th, 2012 at 17:17
Hi,
What is delivery date for these boards? I ordered few for my projects, but had no feedback about delivery or even an estimate of one.
Regards,
Marijus
juuli 26th, 2012 at 10:29
After shipping it takes 1 to 4 weeks. Depending on your location.
september 26th, 2012 at 22:52
Hello,
do the tinyDino have a Atmega168 oder Atmega88? I would like to have one with a Atmega168